Spectacles BANDIDO BANWPCC5 Soudage teinte 5

BANDIDO BANWPCC5

An inexpensive model for genuine protection

28gWeight : 28g Welding Accessory : Neck cord Welding shade 5

Description

Made entirely of highly-resistant polycarbonate, BANDIDO is the perfect value option.

PRODUCT PROS
  • Wrap-arounf fit

Protection

EN166

EN166

Guaranteed minimum resistance of the protective eyewear against everyday risks including dropping the protective eyewear onto the ground, ageing by light exposure, exposure to heat or corrosion etc.

EN170

Risks relating to radiations - UV Protection

The protection filters ultraviolet radiation. This type of protection is particularly recommended during activities where the source of ultraviolet radiation is predominant, such as mercury vapor lamps, actinic or germicides. Levels of application: 2-1.2, 2C-1.2 Lens color: Clear, blue, yellow or green. Adding the code "C" indicates good color recognition by the holder

EN172

Solar radiations risks

Filter protection for industrial solar radiation. Recommended for outdoor work, EN172 norm guarantee a protection of 99.99% from ultra-violet solar radiation. Levels of application: 5-3.1 (Polarized) 5-2 (Twilight), 5-1.4 (ESP or CSP), 5/1.1-1.4 (Contrast), 5-2.5 and 5 to 4.1 (smoke) Lens colour: depends on the lens technology

EN175

Standard for welding

Specifies safety requirements and test methods related to the eye and face protective equipment used for welding and associated techniques. This European standard specifies the requirements and test methods related to the personal protective equipment used to protect the operator's eyes and face against harmful optical radiation and other specific risks due to customary welding or cutting processes or other associated techniques. The standard specifies protection, including ergonomic aspects, against the risks or hazards of various kinds: radiation, inflammability, mechanical and electrical risks. This standard defines the terms used and specifies the requirements related to materials, design and manufacture.

CE

European standard

Frame marking must include the CE symbol

F

Mechanical risk - Low energy impact

Low energy impact, resists a 6 mm, 0.86 g ball at 45 m/s

T

Mechanical risk- High speed particles at extreme temperatures

The letter T, immediately after the mechanical strength symbol, authorises use for high speed particles at extreme temperatures.

1

Optical class

Continuous work - Worn permanently

Technology

WELDING SHADE 5

Protection from UV and infra-red radiation linked to certain welding activities that do not require to wear a welding helmet.